Spark sliders. Made in the Netherlands.
SPARKS.
ON PURPOSE.
Spark sliders, printed in-house in the Netherlands. Built for the track, not for the street.
For use on closed courses and private property only. 18+.
Three things we promise
01
Built for the track
Our sliders are designed for closed courses and private property. Not for public roads.
02
Made to be used up
A spark slider is a consumable, just like your pucks. We do not pretend otherwise. Once we have measured it, we tell you exactly what you get out of one.
03
Printed in-house, tested in-house
We design and produce in the Netherlands. We check every batch ourselves, and we can tell you what is in it.
Sliders
The range
Four seconds. That is the rule.
A slider gets hot. Very hot. So you work in cycles: four seconds of contact at most, then five seconds of cooldown. Stick to that and you get the most out of every slider. Ignore it and the slider is gone within one session.
4 SEC
Four seconds of contact with the asphalt at most.
5 SEC
Then at least five seconds of cooldown.
REPEAT
As long as the slider has material left. Then replace it as a whole.
Production
Printed in-house in the Netherlands
Our sliders come off our own printers. Our design, our material, our quality check. A new geometry goes into production within a week, and every batch passes through our hands before it leaves the building.
No middlemen. No unknown factory. You know what you buy and who you buy it from.
More rods, more sparks
Choose your foot slider
01
Foot slider 5 set of 2
- + 5 ferrocerium rods per slider
- + 2x foot slider, fitting guide
02
Foot slider 10 set of 2
- + 10 ferrocerium rods per slider
- + 2x foot slider, fitting guide
03
Foot slider 15 set of 2
- + 15 ferrocerium rods per slider
- + 2x foot slider, fitting guide
Who it is for
Track Rider
You ride two to six track days a year in your own leathers. You want the photos of your day to look better.
Content Rider
You are building your own channel and want footage that performs. On track, where it belongs.
Passenger
You want to join in without a bike of your own. Finger sliders for the pillion seat, on a closed course.
Skate & scooter
You want the effect you saw in the videos. Board sliders, on a closed course or your own property. 18+.
Gift buyer
You are looking for something special for a rider. A kit is the easiest gift you can give.
Warning
Read this before you buy
Warning
Read this before you buy
- 01 Generates sparks that can ignite flammable material.
- 02 Eye protection is mandatory for rider and bystanders.
- 03 4 seconds of contact at most, then 5 seconds of cooldown.
Frequently asked questions
Only on a closed course or on private property, with permission from the owner or organiser. Not on public roads.
A slider wears away completely during use. Count on roughly 2 to 3 minutes of total contact time per slider, in short runs of 4 seconds max. Indicative, based on our first test series; we keep measuring and will update the number. Stick to the 4-second rule: 4 seconds of contact max, then 5 seconds of cooldown. Read more on the page How long does it last.
No. There are no refills or inserts. You replace a worn slider as a whole.
Almost any leather suit or boot. You glue the base onto a clean, dry, degreased surface with superglue. The mount is permanent, so pick your position once, and pick it well.
Four seconds of contact with the asphalt at most, then at least five seconds of cooldown. That keeps the slider in one piece and gets you the most out of it.
Yes. We ship to the Netherlands, Belgium and Germany. Shipping is free from € 30.
Waitlist
Stay in the loop
New geometries, test results and season news. No spam.